Black plate (70,1)
Cadillac CUE Infotainment System - 2014 - CRC 1st Edition - 7/15/13
70
Infotainment System
In general there are flexible ways to
speak commands for completing the
tasks. Most of them, except
destination entry and voice keypad,
can be completed in a single
command. If the task takes more
than one command to complete, the
first command would be to indicate
the kind of task to be performed, like
“
Nav.
”
The system replies with
prompts that lead you through a
dialogue to enter the necessary
information. For example, if a
destination for route guidance is
needed, say
“
Navigation
”
or
“
Nav
commands.
”
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See
“
Retained Accessory Power
(RAP)
”
in the owner manual.
Using Voice Recognition
Voice recognition becomes available
once the system has been
initialised. This begins when the
ignition is turned on. Initialisation
may take a few moments.
1. Press
g
on the steering wheel
control to activate voice
recognition, or press
g
on the
infotainment touchscreen on the
centre stack.
.
If voice recognition is
started from the steering
wheel control, the
instrument cluster displays
the selections and visual
dialogue content.
.
If voice recognition is
started from the
infotainment touchscreen
on the centre stack, the
selections and visual
dialogue content are
displayed on both the
centre stack display and the
instrument cluster display.
2. The audio system mutes and the
system plays a prompt followed
by a beep.
3. Wait until after the beep
completes, then clearly speak
one of the commands described
in this section.
A voice recognition system
prompt can be interrupted while
it is playing by pressing
g
again.
For example, if the prompt
seems to be taking too long to
finish, press
g
again and the
beep should happen right away.
There are two voice prompt modes
supported:
.
Long verbal prompts: The longer
prompts provide more
information regarding the
supported actions.
.
Short prompts: The short
prompts provide simple
instructions about what can be
stated.
If a command is not spoken, the
voice recognition system says a
help prompt.