Black plate (35,1)
Cadillac Escalade EXT Owner Manual - 2012
Vehicle Care
10-35
6. Press a new bulb into the bulb
socket.
7. Reinstall the socket into the
taillamp assembly by turning the
bulb socket clockwise until it
clicks.
8. Reinstall the taillamp assembly
making sure to line up the pins
with the vehicle and tighten the
screws.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket. Turn the bulb
socket counterclockwise and pull
the bulb socket out of the lamp
assembly.
2. Pull the bulb straight out of the
socket.
3. Install the new bulb into the
socket.
4. Reinstall the bulb socket by
turning it clockwise into the lamp
assembly.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp
7441
License
Plate Lamp
168
Sidemarker Lamp
194LL
Stoplamp/Taillamp/
Turn Signal Lamp
3057K
For replacement bulbs not listed
here, contact your dealer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
