Cadillac 2010 STS, Owner'S Manual

Page: 179 / 536

Driver Exit Settings Submenu Items
RECALL EXIT SETTINGS
To recall exit settings:
1. Enter the memory programming mode for your exit
settings by following the instructions listed
previously under
“ Entering the Driver Exit Settings
Submenu. ”
2. From the DRIVER EXIT SETTINGS submenu, turn
the tune/select knob to scroll to RECALL EXIT
SETTINGS and press in the knob.
If the vehicle is in P (Park), one beep will sound
and your previously saved exit position will then be
recalled.
If the vehicle is not in P (Park), three beeps will
sound and your previously saved exit position will
not be recalled.
A memory recall can be stopped by pressing any
memory seat or mirror position button.
If you would like the stored exit positions to be recalled
when your vehicle is in P (Park), the vehicle is off, and
the driver's door is opened, see
“ AUTO EXIT SEAT ”
and “ AUTO EXIT COLUMN ” under Vehicle
Personalization on page 3 ‑ 58 .
STORE EXIT SETTINGS
To store exit settings:
1. Adjust your settings for the driver's seat, the
outside rearview mirrors, and the steering column
to a comfortable exit position.
2. Enter the memory programming mode for your exit
settings by following the instructions listed
previously under
“ Entering the Driver Exit Settings
Submenu. ”
3. From the DRIVER EXIT SETTINGS submenu, turn
the tune/select knob to scroll to STORE EXIT
SETTINGS and press in the knob. Two beeps will
sound to confirm that your new exit settings are
saved.
4. Repeat the procedure for a second driver by
programming the other driver number.
3-79
Ofrecido por www.electromanuales.com