background image

Black plate (11,1)

Cadillac Escalade Two-mode Hybrid - 2010

{

WARNING:

Steam and scalding liquids from a hot cooling
system can blow out and burn you badly. They are
under pressure, and if you turn the coolant surge
tank pressure cap

even a little

they can come

out at high speed. Never turn the cap when the
cooling system, including the coolant surge tank
pressure cap, is hot. Wait for the cooling system
and coolant surge tank pressure cap to cool if you
ever have to turn the pressure cap.

Notice:

Using coolant other than a pre

mixed

DEX-COOL, available at your dealer/retailer, may
damage your vehicle. Any repairs would not be
covered by your warranty. Always use a pre

mixed

DEX-COOL (silicate-free) coolant in your vehicle.

{

WARNING:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot enough.
Do not spill coolant on a hot engine.

If the DMCM coolant is empty , the vehicle must be
serviced by your dealer and a special fill procedure
must be followed.

Notice:

Attempting to fill the DMCM cooling surge

tank yourself when the fluid level is empty can
damage your vehicle. Your vehicle must be
serviced.

6-11

Summary of Contents for 2010 Escalade Two-mode Hybrid















































































































Reviews: