{
CAUTION:
FCA may not detect and warn soon enough
to stationary or slow-moving vehicles or
other objects ahead of you. You could
crash into an object ahead of you. Do not
rely on FCA when approaching stationary
or slow-moving vehicles or other objects.
Unnecessary Alerts
FCA may occasionally provide alerts that you
consider unnecessary. It could respond to
a turning vehicle ahead of you, guard rails, signs,
and other stationary objects. This is normal
operation, your vehicle does not need service.
Other Messages
There are three messages that may appear on the
Driver Information Center (DIC). They are
CLEAN RADAR, RADAR CRUISE NOT READY
and SERVICE RADAR CRUISE. See
DIC
Warnings and Messages on page 239
.
Cleaning the System
The radar can become blocked by snow, ice, or
dirt. If so, you may need to turn off the engine and
clean the lens. See “Cleaning the System”
under
Adaptive Cruise Control on page 173
.
Flash-to-Pass
This feature lets you use the high-beam
headlamps to signal the driver in front of you that
you want to pass.
The flash-to-pass feature will only work with the
headlamps on. It does not work with Daytime
Running Lamps (DRL).
Pull and hold the turn signal lever toward you
to use.
If the headlamps are on high beam, they will
switch to low beam. To return to high beam,
push the lever away from you.
165
Summary of Contents for 2007 DTS
