Ignition Positions
With the ignition key in the ignition, the key can be
turned to four different positions:
Notice:
Using a tool to force the key from the
ignition switch could cause damage or
break the key. Use the correct key and turn the
key only with your hand. Make sure the key
is in all the way. If none of this works,
then your vehicle needs service.
A (OFF):
This is the only position in which the
ignition key can be inserted or removed.
This position locks the ignition and transaxle.
It is a theft-deterrent feature.
B (ACCESSORY):
This position lets the radio and
windshield wipers operate while the engine is off.
To use ACCESSORY, turn the key clockwise.
C (RUN):
This position is where the key returns to
after the vehicle is started. This position displays
some of the warning and indicator lights.
The battery could be drained if you leave the key
in the ACCESSORY or RUN position with the
engine off. You may not be able to start your
vehicle if the battery is allowed to drain for
an extended period of time.
D (START):
This position starts the engine.
A warning chime will sound and the Driver
Information Center (DIC) will display DRIVER
DOOR OPEN when the driver’s door is opened
if the ignition is in OFF, ACCESSORY and the
key is in the ignition. See
DIC Warnings and
Messages on page 239
for more information.
114
Summary of Contents for 2007 DTS
