2-36
Headlamp High/Low Beam
With the Twilight Sentinel
R
on or with the lamp control
dial turned to the headlamp position, push the turn
signal lever on the driver’s side of the steering wheel
away from you to turn on the high
-
beam headlamps.
This light on the
instrument panel cluster
will be on, indicating
high
-
beam usage.
Pull the lever back to the original position to return
to low
-
beam headlamps. For more information,
see “Headlamps” in the Index.
Flash-To-Pass
This feature uses the high
-
beam headlamps to signal the
driver in front of you that you want to pass. This feature
will work with either the headlamps on or off.
To use, pull the turn signal lever toward you and release.
Windshield Wipers
WIPER: Move the lever on the passenger’s side of the
steering wheel up and down to control the wipers.
MIST: Tap the lever up and then release it for a single
wipe cycle. For more cycles, pull and hold the lever.
= (HIGH): Move the lever all the way up for a fast
wiper speed.
-
(LOW): The third position up controls the low
wiper speed.
--
(DELAY): This position is for a controlled delay
setting. Turn the control dial on the lever to increase or
decrease the delay between wipe cycles.
o (OFF): This position turns off the wipers.
