Cadillac 1999 Escalade, Owner'S Manual, Page: 131 / 352

yellow blue
2-67
3. Return to the universal transmitter in your vehicle
and firmly press and release the universal transmitter
button you have already programmed for two to
three seconds. Press and release the button again
(you may need to do this step up to three times) to
make sure that the universal transmitter has been
trained to the garage door opener motor head unit.
Check that the training was successful. The motor
head unit indicator light should no longer
be flashing.
The garage door opener should now recognize the
universal transmitter. You may either use the universal
transmitter or the hand
-
held transmitter to open the
garage door.
If after following these instructions, you still have
problems training the garage door opener, call the
manufacturer of the unit at 1
-
800
-
355
-
3515 or
Cadillac Customer Assistance (1
-
800
-
458
-
8006 in
the United States) (1
-
800
-
263
-
3777 in Canada).
Erasing Channels
To erase all three programmed channels, hold down the
two outside buttons until the indicator light begins to
flash (after 20 seconds). Release both buttons.
Accessories
Accessories for the universal transmitter are available
from the manufacturer of the unit. If you would like
additional information, please call 1
-
800
-
355
-
3515.
OnStar
R
System (If Equipped)
Your vehicle may be equipped with the OnStar System.
To operate the OnStar System, please consult the user’s
guide provided with the system.