Cadillac 1999 Escalade, Owner'S Manual, Page: 13 / 352

yellow blue
1-7
5. Pull the seatback forward and fold the seatback
down until it is flat.
6. Then, stow the head
restraints by sliding
them into the rear of the
seat cushion. Make sure
the posts go in all
the way.
To return the seat to the passenger position, use the
following procedure.
1. Remove the head restraints by sliding them out of
the seat cushion.
2. Lift the seatback up enough to install the
head restraints.
3. Push the seatback rearward all the way.
4. Lower the seat cushion until it latches in position.
5. After returning the seat to the passenger position,
return the head restraints to the top of the seatback.
6. Pull forward on the seatback and up on the seat
cushion to make sure that the seat is securely
in place.
If the latch plate portion of the center safety belt was put
in the center armrest when the seat was folded, take the
latch plate portion out and place it on the seat. That way,
the center position safety belt will be available for the
center rear seat passenger to use.