Cadex C5100B Battery Tester User Guide
2016 Cadex Electronics Inc.
18
6.
Scroll to the battery’s rated capacity with
and press
the Test key to select.
7.
The Run indicator will flash with the updated C-Code.
8.
Press
Cycle
and confirm the voltage and the capacity
entered previously. The C5100B will perform
charge/discharge/charge and indicate the measured
capacity result in %.
9.
When the battery has finished cycling, the Ready LED will
be lit and the battery’s resistance in mΩ, capacity in % and
voltage in V will be displayed. If there was a problem
during cycling, the Fail LED will be lit.
Select Target Capacity
Select desired Target Capacity between 60, 70, 80 and 90%.
1.
Apply AC power to turn on the Cadex C5100B Battery
Tester. Ensure battery adapter is NOT installed.
2.
There should be no LEDs on and LCD should display
“Install Battery Adapter”.
3.
Press the Test key for 2 seconds and the C5100B will
display
System Setup
, Target Capacity
or
Print Mode.
4.
Scroll to
Target Capacity
with
and press the Test key
to select.
5.
Scroll through
60%
,
70%
,
80%
, and
90%
by pressing up
and down arrow keys and select with the Test key.
Select Print Mode
Select desired Print Mode between Auto, Manual and Disable.
1.
Apply AC power to turn on the Cadex C5100B Battery
Tester. Ensure battery adapter is NOT installed.
2.
There should be no LEDs on and LCD should display
“Install Battery Adapter”.
3.
Press the Test key for 2 seconds and the C5100B will
display
System Setup
, Target Capacity
or
Print Mode.
4.
Scroll to
Print Mode
with
and press the Test key to
select.
5.
Scroll through
Auto
,
Manual
and
Disable
by pressing up
and down arrow keys and select with the Test key.
