3 CHANNEL MIXED MONO
10
LEFT
SPEAKER
4 OHM
RIGHT
SPEAKER
4 OHM
SUBWOOFER
MINIMUM IMPEDANCE
4-8 OHMS
LOW PASS
FILTER INDUCTOR
HIGH PASS
FILTER CAPACITORS
CROSSOVER MODE
SWITCH IN
FULL RANGE
POSITION
CROSSOVER SWITCH
SETTING
COMPONENT VALUES FOR
6dB PASSIVE CROSSOVER
FREQUENCY INDUCTOR CAPACITOR
80 Hz
100 Hz
120 Hz
150 Hz
7.5 mH
6.5 mH
5.5 mH
4 mH
470 uF
330 uF
330 uF
220 uF
Here is how to get a three channel system out of a
two channel amplifier.
Crossover mode switch in Full Range.
Hook up Left and Right Speakers normally as per
diagram using high pass filter capacitors. Wire one
subwoofer to the bridged channel utilizing a low pass
filter inductor. You must use this capacitor and inductor
system when using 4 ohm speakers and woofers.
You can eliminate the need for the capacitors
and inductor if you use 4 ohm speakers for the
Left and Right Channel and an 8 ohm woofer for
the bridged channel.
Summary of Contents for Flash F100-5
Page 1: ......
