Cadel Venus Plus, Instructions For Installation, Use And Maintenance Manual

Page: 14 / 76

14
VENUS PLUS - GIOIA-2
EN
Fig. 13 - Upper screws removal Fig. 14 - Backward screws removal
• Remove the top cover: unscrew the upper screws and the backward screws (see Fig. 13 page 14 and Fig.
14 page 14 ).
Fig. 15 - Upper curved profiles removal Fig. 16 - Supports to bend
• Remove the 2 upper curved profiles (see Fig. 15 page 14 ).
• Slightly bend the supports in order for them to compensate any movement in the metal or majolica panels
(see Fig. 16 page 14 ).
Fig. 17 - Side panel insertion Fig. 18 - Replace upper curved profiles
• Insert from on high the metal or majolica side panels on the appropriate guides getting it slightly course all
the way (see Fig. 17 page 14 ).
• Screw the upper profiles (see Fig. 18 page 14 ).