new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
14
actual temperature the stove supplies.
Connect the wires from the external thermostat (INSTALLER MANUAL)
Once the thermostat is connected, it must be enabled.
Do so as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows.
• Select by pressing “menu”.
• Scroll once again to “External thermostat” using the arrows.
• Select by pressing “menu”.
• Press the - + buttons.
• Select “On” to activate the external thermostat.
• Press the “menu” button to confirm.
• Press the “esc” button to exit.
f - Auto-Eco activation
To select the Auto-Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Auto-Eco” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
g - Eco Shutdown t
To select the Eco - shutdown t function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Eco - shutdown t” using the arrows.
• Press “menu” to confirm.
• Enter the minutes with the + - keys.
• Press “menu” to confirm and “esc” to exit.
h - Pump On T
This menu item allows to adjust the pump activation temperature.
To select the Pump On T function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Pump On T” using the arrows.
• Press “menu” to confirm.
• Modify the °C with the + - keys.
• Press “menu” to confirm and “esc” to exit
i - Auxiliary boiler
An additional (optional) module must be installed to allow an auxiliary boiler to be switched on should the stove be off or in alarm
conditions. By default, this function is disabled; if necessary, activate it through the settings menu.
j - Pellet Recipe
To change the recipe act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Pellet Recipe” using the arrows.
• Press “menu” to confirm.
• Modify the % with the + - keys.
