SATURNO
18
TYPE
Lt (anchor bolt
length)
Screw Ø V x Lv
P (Minimum Hole
depth)
Øf (drill bit diame-
ter)
S (Max Object
thickness)
LH 10
50 mm
8x60 mm
70 mm
10 mm
10 mm
Fastening to an existing surface
POSITION
DESCRIPTION
A
FIXED INSERT PART
U
EXISTING SURFACE
t
ANCHOER BOLTS (SEE PREVIOUS PAGE)
For installation on an existing surface, ensure there is a thickness of at least 17 mm between the fixed wall “A” and
the existing surface “U”, and fix the insert and surface using plugs “t” as shown on the previous page. Make sure
everything is level.
7.3
FASTENING TO THE HORIZONTAL SUPPORT
Place the base in the desired position (after mounting it as explained in the instructions attached to the accessory) and adjust the
height by using the feet (from a min. of 500 mm to a max. of 650 mm).
Make sure there is a power socket behind the pedestal so that the plug is accessible after the unit has been installed. Connect the
smoke outlet and make the air inlets.
It is mandatory
to fasten the support to the floor with anchor bolts and 8 mm diameter screws that will ensure stability of the
product. Take the sliding base and fasten it with the support bracket. The support is already provided with bracket “P” for other
types of product. Do not mount the bracket “P” supplied in the support pack but use the one provided with the insert.
