17
SATURNO
7
TYPE OF FASTENING SATURNO
7.1
HOW TO FASTEN THE INSERT
It is mandatory to anchor the product to a surface since, during annual maintenance operations by the authorised technician, or
when the fuel is loaded, the combustion chamber may be extracted from its seat with the aid of two retractable guides. The pro-
duct can be anchored to an existing surface (which must have certain characteristics) or it can be fastened to the optional support.
Attention! The support surface of the insert must be completely flat.
7.2
FASTENING TO AN EXISTING SURFACE - SUGGESTED CHARACTERISTICS
Installation data
The surface where the fixed part of the insert will be fastened must be in R250 kg/cm2 concrete, if the support is made of poor
material, it is advisable to use a suitable slab for fastening.
We recommend using an anchor bolt with the following characteristics:
DIMENSIONS (TYPE) DIAMETER
LENGTH
SX 10
10 mm
50 mm
KEY
.
LV=
LT+S (SCREW LENGTH)
LT=
ANCHOR BOLT LENGTH
S=
MAXIMUM THICKNESS OF OBJECT BEING FASTENED
ØF =
DRILL BIT DIAMETER
P=
MINIMUM HOLE DEPTH
ØV =
SCREW DIAMETER
