21
KOBE - FENICE - SPARK - INDACO - PRINCE
Caution, before changing the stove’s programming :
• It is recommended to change the factory settings under the supervision of an authorised technician.
• Before installation, ensure the flue has been installed and certified by suitable personnel according to the legal provisions in
force.
Examples of available “Easy Set” configurations compared to «typical» installation of reference:
SET 0 :
Default parameters
SET 1 :
Vertical exhaust
SET 2 :
Concentric vertical exhaust (mainly used in France)
SET 3 :
Horizontal concentric wall exhaust (only used and permitted in France)
SET 4 :
Smoke fitting with horizontal section
Fig. 23 - Ensemble d'exemples
LEGENDA
Fig. 23
A
Smoke Outlet
B
Combustion Air Intake
T
Inspection cap
8.17 PELLETS RECIPE (SEE SECTION H SETTINGS MENU A PAG. 14)
Changes to be made with the support of the authorised technician.
Activates only with the Easy Set function disabled,
"SET: 0"
!
This function is for adapting the stove to the pellets that are being used. In fact, as there are several types of pellets on the market,
boiler operation is extremely variable depending on the fuel quality. In the event the pellets tend to clog the brazier due to an
excessive load of fuel or in the event the flame is always high even at low powers and, vice versa if the flame is low one can decre-
ase/increase the amount of pellets in the brazier:
The available values are:
-30= 30% reduction with respect to the default setting.
-25= 25% reduction with respect to the default setting.
-20= 20% reduction with respect to the default setting.
-15 = 15% reduction with respect to the default setting.
-10= 10% reduction with respect to the default setting.
-5= 5% reduction with respect to the default setting.
0= No variation.
+5= 5% increase with respect to the default setting.
+10 = 10% increase with respect to the default setting.
+15 = 15% increase with respect to the default setting.
