Cadel ATENA3 PLUS 14 User Manual Download

Page: 26 / 27

ATENA3 PLUS 12/14 - DUKE 12/14 AIRTIGHT - SABA 12/14 - MITHOS3 PLUS 12/14

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The stove is at its

highest power but

does not heat up.

Ambient tempera-

ture reached.

The stove is at its minimum value. Increase the desired am-

bient temperature.

Stove running and

display showing

"Smoke Overtepe-

rature"

Reached fume

outlet limit tempe-

rature

The stove runs at minimum. NO PROBLEM!

The stove's smoke

duct produces

condensation

Low smoke tempe-

rature

Check that the flue is not clogged.

Increase stove power to minimum (pellet drop and fan revs).

Install condensation collection cup.

Stove running and

display showing

"SERVICE"

Routine main-

tenance alert (it

does not block the

system)

When this flashing message appears upon start-up, it means

that the preset operating hours have elapsed before mainte-

nance. Contact the service centre.

Summary of Contents for ATENA3 PLUS 14




























Search results

Summary of Contents for ATENA3 PLUS 14

Reviews:

Related manuals for ATENA3 PLUS 14

Brands by name

Popular brands

Cadel ATENA3 PLUS 14, User Manual

Search results

Summary of Contents for ATENA3 PLUS 14

Reviews:

Related manuals for ATENA3 PLUS 14

Brands by name

Popular brands