8
2.
Assign a program number between P5 and P99 as follows:
- Press one of the P5 – P6 “Quick Access” buttons to assign
a program to one of the last 2 positions.
(The first 4 are reserved for preset Arby’s programs.)
- Use the or buttons to assign programs P7- P99.
3.
The program number will show in the LED display window.
4.
Set preheat temperature and the cooking parameters (Time,
Temperature;
See below for details
.)
5.
Save the program by pressing the
Memory button until you
hear a long beep. When the beep is heard, the program is saved.
6.
To start the program, press the
START / STOP button.
7.
You may press the
Program button to go into the manual
mode at any time.
•
SETTING PREHEAT TEMPERATURE
♦
(1) Press the STEP button
♦
(2) The corresponding “PRE” LED lights up.
♦
(3) Press the or buttons until the red LED display shows the
desired preheating temperature. (Maximum = 500°F )
♦
It is always better to preheat the oven to a temperature about 15-
20% higher than is required for cooking, in order to reduce the effects of heat lost when opening the
oven door to place food in the oven.
♦
Preheating allows only temperature adjustments. The duration of the preheating phase depends on the
temperature set (the appliance heats up to the temperature in the least time possible).
Always preheat oven cavity before placing food in the oven.
♦
NOTE: If preheating is not set, the oven will propose a temperature of 356
°
F.
•
SELECT STEP 1
♦
(1) Press the STEP button
♦
(2) The LED corresponding to STEP 1 lights up
♦
(Arby’s programs do not use STEPS 2 or 3.)
•
(THE SELECT BUTTON)
The SELECT button allows the operator to select and set these functions for STEP 1: TIME,
TEMPERATURE.
•
SETTING THE COOKING TIME / DURATION
♦
(1) To choose the Time function, press the SELECT button
repeatedly until the blue Time LED is lit next to the Time icon
(clock) on the control panel.
♦
(2) To set the time function, use the or button. Hold the
button down to quickly scroll to desired setting.
♦
(3) The LED display shows the time in hours and minutes (ex. 130 =1 hour and 30 minutes)
♦
The maximum time allowed in each step is 9 hours and 59 minutes, which will show in the display
window as “
959
”. Minimum time per step is 1 minute.
♦
FOR CONTINUOUS OPERATION
, (the oven will operate in continuous mode until the operator
intervenes):
STEP 1 > Press the button when time is set at “
0
”, and “
INF
” will appear in the display window.
The oven will then work continuously until you stop it by pressing the
START / STOP button.
