7
3.3
OPERATING IN PROGRAMMED MODE
•
There is room to save up to 99 programs in your oven’s memory for “One Touch Cooking”.
NOTE: The 6 programs saved by assigning to P1 – P6 will be the ones later accessed by the
-
“Quick Access” buttons on the control panel.
(See callout #10 on page 5, and chart on page 6.).
•
TO RECALL A SAVED PROGRAM:
1.
For Quick Access Programs P1 through P6 (; see chart on
page 6. Programs P1 – P4 have been preset at the factory
to Arby’s specifications)
, (1) press the “Quick Access” button
corresponding to the desired program. The LED window on
the left side of the control panel will show the selected
Program number.
2.
For any optional Programs P7 through P99 which you may
have preset
, (1) press the
Program button, (2) then select
the number of the program you wish to use by pressing the
or button until the desired program number appears in the
LED window..
•
START COOKING / INTERRUPT COOKING / OVEN SHUTDOWN
First, select the desired program (see TO RECALL A SAVED PROGRAM, above.)
♦
(1) To start or stop the cooking cycle, press the
START /
STOP button.
♦
(2) The
Start/Stop LED lights up and the preheating cycle
starts, indicated by the “PRE” LED lighting up (3). The LED
display shows the preheat temperature previously set.
♦
The oven beeps and the “PRE” LED blinks when the pre-
heating temperature has been reached.
♦
Place food in the oven. (4) After the food is placed in the oven
and the door is closed, the “1” STEP LED lights up and the
first cooking STEP starts automatically.
♦
(5) The total cooking cycle duration countdown blinks in the
LED window. The LED window shows the time in hours and
minutes (ex. 130 =1 hour and 30 minutes.)
♦
At the end of the cooking cycle, the heating element(s) and
fan(s) will stop running and a beep will sound.
♦
Press the
START / STOP button for 2 – 3 seconds if you want to
INTERRUPT
the cooking cycle
before it has finished.
♦
If you want to activate the “
STAND-BY
” mode, press the
START / STOP button for about 6
seconds. Only the
START / STOP LED will remain lit. When ready to reactivate, press the
START / STOP button.
•
TO ASSIGN AND SAVE A PROGRAM (Optional):
1.
Access the Program menu by pressing the
Program button,
OR by pressing a “Quick Access” button (P5-P6; see chart on
page 6).
