background image

OPERATING INSTRUCTIONS

1. Before using for the first time, become familiar with the Infrared Hot Plate

features, (Figure A):

2. This hot plate is equipped with an automatic cooking system, i.e. it heats up

to each setting quickly with its maximum power and then maintains the temperature.
3.

  

Use the settings as follows:

1-5    - for warming up and keeping warm

4-9    - for moderate temperature cooking

8-12  - for high temperature cooking

4. Rocker switch light will come on when hot plate is plugged into electric outlet

and the rocker switch is put in “ON” position.
5. Right round signal light will come on when heat control knob is turned from

“OFF” to a heat setting.

Left round signal light will cycle on & off as the element maintains temperature.
6. Only use pots or pans with a perfect, even bottom and an appropriate diameter.

If the pot bottom is uneven or too small, energy will be wasted. 

Do not

 

use

 cooking

containers consisting of synthetic material, inferior enamel, china, or aluminum foil

in any form. If an aluminum pot or pan is used, it must not be allowed to boil dry,

or the pan will warp or melt and the hot plate cooking surface will be permanently

damaged. Always use a pot, pan, or casserole dish for its intended purpose. Only

certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed cookware

are suitable for cooktop use without breaking due to the sudden change in temp-

erature. Check the cookware manufacturer's recommendations for cooktop use.
7. The glass ceramic cooking surface and the pot bottom must always be clean

and dry. Rough-bottomed cookware can scratch the hot plate’s heating surface.
8. Cover cookware while in use whenever possible to avoid spatters on cooktop.
9.

Do not

 place food directly on the cooking surface. Always use cookware.

10.During use the surfaces will get hot. Please use caution when handling the

appliance to avoid the risk of getting burned! Keep the power cord away from the

cooking plate, as well as the power cords of other adjacent electrical appliances.
In case of signs of damage to the appliance, the power cord or the sealing, or if

the glass plate is broken, immediately unplug the appliance.

Figure A

Temperature

Control Knob

Heating Zone

( 9”diameter)

Congratulations on your purchase of Cadco’s Infrared Hot Plate!

You have chosen a very special hot plate with the advantages of a glass ceramic

heating surface combined with a high-grade stainless steel casing.

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or property damage when using electrical

appliances, basic safety precautions should always be followed, including the

following:

1.

READ ALL INSTRUCTIONS BEFORE USE.

2. Do not touch hot surfaces! Always use hot pads or pot holders until unit cools.

3. To protect against electrical shock, do not immerse unit, cord or plug in water

or other liquid.

4. Close supervision is necessary when any appliance is used by or near 

children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool        

completely before putting on or taking off parts, and before cleaning or storing

the appliance.

6. Do not operate any appliance with a damaged cord or plug or after the 

appliance malfunctions or has been damaged in any manner. Return the 

appliance to the Cadco Factory Service Department (call 860-738-2500 

first) for examination, repair or adjustment.  (*Canadian customers contact

Tarrison Products Ltd. in Ontario, Tel. (905) 825-9665.)

7. The use of accessory attachments not recommended by the appliance 

manufacturer may cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner or in a heated oven.

11. Place unit on a heat-resistant, stable and plain working surface.  The space

above the appliance must be free and the distance from the wall must be 

at least 4” on all sides

 to ensure unhindered air circulation.

12. Overheated fat or oil can ignite. This is why foods containing fat or oil must

 

be prepared under supervision only.

13. It is recommended that this appliance not be moved when the pot or pan

 on  it contains hot oil or other hot liquid.

14. Do not clean with metal scouring pads. They can scratch and ruin the        

finish of your unit.

15. Do not use appliance for other than intended use.

16. Do not use cooking containers consisting of inferior enamel, synthetic 

material, china, or aluminum foil. 

DO NOT USE PLASTIC WRAP.

SAVE THESE INSTRUCTIONS

This product is for household use only.

NOTE:

 A short power supply cord (or cord set) has been provided to reduce the

hazards resulting from becoming entangled in or tripping over a longer cord. Longer

cord sets or extension cords may be used if care is properly exercised in their use. If

a long cord set or extension cord is used, the marked electrical rating of the cord set

or extension cord should be at least as great as the electrical rating of the appliance.

The longer cord should be arranged so that it will not drape over the counter top or

table  top  where  it  can  be  pulled  on  by  children  or  tripped  over  accidentally.

     This unit is equipped with a grounded, 3-pronged commercial plug. For safety, this plug

MUST be connected to a 3 pronged outlet. Before connecting power, make sure the

outlet’s voltage and frequency correspond to the data plate on the hot plate (120V/60hz.)

2

3

Glass Ceramic

Cooking Surface

POWER

ON/OFF

Rocker Switch

Right Round Signal Light

Left Round Signal Light

Reviews: