36
Revision 1 2017
CDC seven
displayed on-screen. This does not apply to stereo output channels however,
where both left and right “legs” are displayed.
Note also that the layers defined as above do not include the LCR master output
channels. These may be displayed on the main screen either by “swiping” (see
below), or pressing the LCR output’s SEL button (see [21] at “LCR SEL button”
on page 21).
The CDC seven provides two methods of changing layers:
1. Layer buttons – the current layer is selected by the Input Layer and
Output Layer buttons to the right of the fader block ([12] at “INPUT
LAYERS and OUTPUT LAYERS buttons” on page 17):
FADER FOLLOW
OUTPUTS
INPUT LAYERS
OUTPUT LAYERS
C
A
D
B
E
F
BUS A
BUS B
BUS C
VCA
GEQ
FAD.
FOL.
2. Swiping – a “swipe” action horizontally across the screen will shift the
displayed set of channels a number of channels proportional to the
“length” of the swipe. This is a very powerful feature of the CDC seven,
and allows very rapid access to channels not currently displayed.
