18
Revision 1 2017
CDC seven
14. Fad. Fol. button – when active, the Fader Follow Outputs function allows
the operator to use the faders to control the bus send levels from the
currently selected input channel. An input channel layer must be selected
for Fader Follow Outputs to be available. The left-most channel in the
visible set, and busses 1 to 16 (Output Layer A) will be selected by
default: the SEL buttons select other channels, and the Output Layer
buttons select higher-numbered busses for control. While Fader Follow
Outputs is active, the screen display and rotary encoders continue to be
active for input channels.
15. Headphones – two ¼” stereo jacks are fitted under the front armrest;
these carry the console’s Phones output. Each output has a volume
control.
16. USB ports – two type ‘A’ USB sockets are fitted under the armrest for
firmware upgrades, exporting/importing Projects/Shows or plugging in a
keyboard. Many screen displays feature a “virtual” QWERTY keyboard,
but a hardware keyboard may be plugged in here and used, if preferred.