![background image](http://html1.mh-extra.com/html/cadac/braai-mate-1192-09/braai-mate-1192-09_user-instructions_3326578006.webp)
4
4
Description
Part Number
Description
Part Number
Grid (415 x 230mm)
1192-SP011
Control knob
1192-SP013
Jet 0.86
1192-SP003
Drip cup
1192-SP004
Wheel
1192-SP005
Flame tamer
1192-SP006
Thermometer
1192-SP014
Grid (415 x 350mm)
1192-SP012
9. Spares & Accessories
Always use genuine CADAC spares as they have been designed to give optimum performance.
7. Cleaning
• To clean the body, simply wipe with a damp cloth using a little detergent if necessary.
• Do not use abrasive cleaners or scourers as this will cause permanent damage to the painted surface.
• Even though stainless steel is remarkably resistant to tarnish and rust relative to ordinary steels, it still requires proper care. We
recommend the following:
• After use, clean the stainless steel surfaces with clean water and a soft cloth for light cleaning, while a commercially available
stainless steel cleaner with a soft cloth should be used for tougher areas. Ensure that you remove all excess stainless steel cleaner
after cleaning your BBQ.
• To repair minor tea staining or pitting, you can use a light, non-metallic scourer. It is important that you rub with the natural grain of
the stainless steel surface to avoid leaving visible scratch marks.
• Between uses, it is a good idea to leave the barbeque covered to prevent dust and air borne salts settling on the stainless steel
surfaces. If left for too long, these particles can act as rust centres.
• With a small amount of care, your investment in quality stainless steel will keep its beautiful finish as well as its value for a long time
to come
8. Storage
• Handle the appliance with care. Do not drop it.
• After use, wait until the appliance has cooled down, disconnect it from the gas cylinder and store in a cool dry place away from heat.
• Keep the hood closed when not in use to prevent dirt and insects falling into the unit, which may affect the gas flow.
• Use a CADAC BBQ cover, especially if the unit is stored outdoors.
• Before every use, ensure that the burners and venturies are free of insects, dust and spider webs.
10. Returning the Appliance for Repair or Service
• Do not modify the appliance. This may cause the appliance to become unsafe.
• Any modifications will render the CADAC (Pty) Ltd warranty null and void.
• If you cannot rectify any fault by following these instructions, contact your local CADAC stockist for inspection and/or repair.
GB
503-0733 LEV6 (1192-09) Braai Mate - User Manual (SA).indd 4
2019/07/16 10:19:53