background image

1

1

CAUTION

Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to 

avoid endangering your life. If still more gas appliances and/or occupants using gas are added to the space, additional ventilation 

must be provided.

IMPORTANT

Read these instructions carefully so as to familiarise yourself with the appliance before fi ting the appliance to a gas cylinder.

Retain these instructions for future reference.

GB

1. General

•  This is an economic gas appliance designed for an optimal cooking experience using environment friendly LP gas.

•  The appliance conforms to BS EN 484: 1998 and SANS 1539:2012

•  Note that fi gures in this user manual are shown for visual purposes only and may differ to your appliance.

•  Please read all the instructions and warnings on the appliance before use.

•  It is important that all gas connections have been correctly connected to prevent any gas leaks.

•  Do not use a leaking, damaged or malfunctioning appliance.

•  This appliance must only be used with an approved hose and regulator. (A 2.8kPa hose and regulator supplied only in South Africa)

•  Ensure that the appliance is used in a well-ventilated area.

•  Handle the appliance with care, do not drop it.

•  When using a pot, the minimum recommended pot size is 150mm and maximum pot size is 300mm. 

•  The gas cylinder is to be used in an upright position only.

•  Read the instructions before using the appliance.

•  Use Outdoors Only

2. Safety information

 

These instructions are for your safety and to help you avoid risk of injury 

 

and/or damage. All warranties will become void if you do not follow these 

 instructions.

•  The hose and seal on the regulator must be checked for wear or damage 

 

before every use and before connecting to the gas cylinder.

•  In the event of light back (where the fl ame burns back and ignites at the 

 

jet) immediately turn off the gas supply by fi rst closing the control valve on

 

the gas cylinder and then the appliance valve. After the fl ame is 

 

extinguished remove the regulator and check the condition of its seal, 

 

replace the seal if in doubt. Re-light the appliance. Should the fl ame 

 

persistently light back again return the product to your authorised CADAC 

 

repair agent.

•  Ensure the appliance is used away from fl ammable materials. Minimum 

 

safe distances; above the appliance 1.2 m, at the rear and sides 600mm.

•  Do not use an appliance that is leaking, damaged or which does not 

 

operate properly.

•  Ensure that the gas cylinder is fi tted or changed in a well-ventilated 

 

location, preferably outdoors, away from any sources of ignition, such as 

 

naked fl ames and away from other people.

•  Keep gas cylinders away from heat and fl ame. Do not place on a stove or 

 

any other hot surface.

•  Ensure that the assembled product is stable and does not rock.

•  Never leave the appliance unattended when lit.

•  If there is a leak on your appliance (smell of gas), turn off the gas supply, 

 

fi rstly at the gas cylinder and then on your appliance by turning the 

 

respective knobs fully clockwise. Take them outside immediately into a 

 

well-ventilated fl ame-free location where the leak may be detected and 

 stopped.

•  This appliance consumes oxygen and needs ventilation for optimum 

 

performance and for safety of those in close proximity.

•  Room ventilation is important for the effi cient performance of the 

 

appliance and for the safety of the occupants in the room.

•  The room where this appliance is used should have a window or a door that can be opened or partially open during use. If there is no 

window or door available for room ventilation, extra ventilation must be installed for your sefety.

•  If you wish to check for leaks on your appliance, do it outside. Do not try to detect leaks using a fl ame, use soapy water.  

The correct way is to smear the joints with soapy water. If bubbles form then there is a gas leak. Immediately turn off the gas supply 

fi rst by closing the control valve on the gas cylinder and then the appliance valve, check that all the connections are properly fi tted. 

Re-check with soapy water. If a gas leak persists return the product to your CADAC dealer for inspection / repair.

•  Do not modify the appliance. Do not use it for anything for which it has 

 

not been designed.

•  During use, parts of the appliance will become hot (particularly the burner) Avoid touching hot parts with bare hands. The use of 

gloves is recommended.

•  Keep young children away from the appliance at all times.

•  Do not twist or pinch the hose.

•  Do not move the appliance during use.

•  Do not use the appliance without the Potstands being in place and properly located.

•  Turn off the gas supply at the gas container after use.

•  Do not modify the appliance, any modifi cation may be dangerous.

Fig. 1

Seal

Cylinder Valve

Fit hose 

clamp 

here

Regulator

Hose

Summary of Contents for 202P1








Reviews: