24
Turning on and off a Slave group
13. If you wish to stop firing a
particular group,
turn the group
off by selecting the group
(see
steps 6 and 7) and
press and hold
the
button. The screen will
show <OFF> in the center row.
Note:
The RF60 Master can also be
turned off by pressing and holding
the
button in the Master group.
Once turned off, the RF60 Master will
not fire, but it will still command
the RF60 Slaves, changing their
settings and firing them accordingly.
14. To
turn on a group again,
select
the group (see steps 6 and 7) and
press and hold the
button.
The power level and zoom level
last used for the group will be
shown in the center row again.
15. Press the shutter release button
on the camera and the RF60 Master
and Slave units in groups A, B, C,
or D will fire at the power level
and zoom level you have set in the
RF60 Master.
