12
- Once fully charged, the flash-
ready indicator stays red and the
flash is ready to give full power
output.
- Press the
button to fire a
test flash.
Adjusting the Flash Head
By pointing the flash toward a wall or
ceiling, the flash will bounce off
the surface before illuminating the
subject. This will soften the shadows
7.4
Caution:
1.
When the flash is switched ON but
not used, after a certain period
of time, the flash’s power turns
off automatically. However, the
flash still consumes power and
batteries discharge over a long
period of time, which may damage
the battery contacts of the flash.
Therefore,
shut off the flash
power if the flash is not in use.
2.
If you fire more than 20
continuous flashes at full power
in short intervals, the inner
overheating prevention function
may be activated to prolong the
recycling time to about 8 seconds
– 20 seconds. The temperature
warning signal will appear in
the status bar of the LCD screen.
If this occurs, allow a rest time
of about 15 minutes, and the flash
will then return to normal.