53
Step
Description
Picture
3
The page with all the main
parameter is displayed:
•
Power
a.
7kW (1-phase)
b.
22kW (3-phase)
•
CASE
a.
B: no cable
b.
C: with cable
•
CP type
•
Connector inter-block
enable
9
Charging process
Before starting the charging process the user must be sure the plug is correctly connected to
the EV.
In the
CASE B
mode (no integrated cable) connect the cable to the charger and then to the EV
on the other side.
In the
CASE C
mode (integrated cable) connect the cable to the EV.
The charging process can start in three different modes:
•
with no authentication (FREE mode)
•
by the APP (APP mode)
•
by the RFID authentication (RFID mode)
9.1
FREE mode
If the FREE mode is set, the charging process starts automatically after the charging cable is
connected to the vehicle.
To enable the FREE mode please follow the steps in the following table: