INSTALLING THE BRIDLE
1) You will need a large area to lie out the kite and bridle lines,
preferably out of the wind.
2) Lay the lines out so that the bridle cluster is away from the kite and
the lines are pointing toward the kite. The red bridle goes on the
left side of the kite, but when you are attaching it, the kite will be
upside down (leading edge on the ground). Therefore the red bridle
will be on your right (the kite’s left).
3) Lay out the lines so that the main line is on the outside, the front
(cross bridle line) is next, and the rear line is on the inside.
4) Be sure that the cluster is not tangled or twisted.
5) Utilizing the larks head, attach V1 (front) and V2 (rear) lines to the
wingtip bridles. Connect to knot #2 (middle).
6) Do this on each side.
2 TO 4-LINE CONVERSION
CO2
CONT’
