LINE LENGTH CORRECTIONS
If your bar is at an angle,
your leader line needs adjustment.
Adjustments are made by moving the knot on the end of the leader line
on the leader
opposite
the wrist leash leader
.
DO NOT CHANGE THE LEADER LINE WITH THE WRIST LEASH
.
It has a set length that enables the system to work properly.
•
If the LEADER LINE is too long, loosen the knot and move it toward
the bar.
•
If the LEADER LINE is too short, loosen the knot and move it away
from the bar.
•
Re-tighten the knot and check your line length again. Adjust again if
necessary until the control bar is balanced.
•
DO NOT
put knots in your STEERING LINES. Knots in the STEERING
LINES compromise the life of the line.
LINE LENGTH CORRECTIONS
CO2
LEADER LINE
TOO SHORT
LEADER LINE
TOO LONG
CORRECT
Control
bar is
even and
parallel
with your
shoulders.
