21
2018 CONTROL SYSTEM USER MANUAL
Both the CAS (Centreline Adjustment Strap) and
the Trim Lite Cleat System effectively change the
length of your front lines (referred to as trim).
By pulling on the CAS Yellow Handle, or the Trim
Lite Webbing handle you shorten the line ( depow-
ers the kite slightly). To repower the kite you need to
lengthen the front lines by either pulling on the CAS
Black Handle, or by releasing the Cleat Line from
the Trim Lite system.
CENTERLINE ADJUSTMENT STRAP (CAS)
• Pull on the Yellow T Handle to depower.
• Pull on the Black T Handle to re – power.
REPOWER
DEPOWER
NOTE: The CAS is meant to provide a limited
amount of trim and is not to be confused
with, or used in place of the 1X depowering
function (see next section).
TRIM SYSTEMS.
To Depower:
• Pull the webbing handle towards your body, until the required trim is reached. (FIG1)
• When desired trim is reached pull the handle down in parallel to the Depower Mainline to
set the line in the cleats teeth. (FIG 2)
To Re-Power
• Pull the Webbing Handle towards your body to release the line from the cleat. (FIG 1)
• Lift the rope outwards slightly so that the Trim line is free from the cleats teeth. (FIG 3)
• Let the line feed through till the desired position is found.
• Move the webbing handle back to a parallel position to the DPML to set the line in the
cleats teeth. (FIG 2)
FIG 1
FIG 2
FIG 3
OPERATION
