manualshive.com logo in svg

Cabletron Systems TRMM, User Manual, Page: 61 / 70

Share
Download
Cabletron Systems TRMM User Manual Download Page 61

THE DEVICE STATISTICS SCREEN

6-8

6.2  

SELECTING A COUNTER MODE

The Device Statistics screen lets you view statistics gathered from any 
time frame you choose to specify.  This section explains how to 
pre-determine the amount of statistical data you want displayed.

You can select from either of the following three counter modes:

•

ACCUMULATE – lets you initiate a statistics display for a specified 
time frame.

•

DELTA – lets you automatically display statistics since the last the last 
screen update (or REFRESH Nsec selection set from the CHASSIS 
STATUS VIEW screen).

•

TOTAL – lets you automatically display statistics since the last power 
up.

To select a counter mode: 

1. Highlight either of the two mode selections (the box below shows 

example options).

2. Press Enter to execute the change.  The corresponding Counter Mode 

field at the top of the screen will change to reflect the selection.

6.2.1  Using the ACCUMULATIVE Mode

Use the ACCUMULATIVE mode to specify a time frame from which you 
want to display network statistics.

To specify a time frame:

1. Select the the ACCUMULATIVE mode.  The Clear Date and the 

Clear Time fields appear near the top of the screen.  

ACCUMULATE     TOTAL                      REFRESH 3sec                RETURN

             Clear Date:  01/01/95         Clear Time:  01:34:55

Summary of Contents for TRMM







































































Reviews:

No comments