Cabletron Systems TRMM User Manual Download Page 39 | Manualshive

Page: 39 / 70

Cabletron Systems TRMM User Manual Download Page 39

THE DEVICE SETUP MENU

4-18

Adding Stations to the Station Address Allowed List

To add stations one at a time to the Station Address allowed list:

1. Highlight the Stn Edit field.

2. Press Enter to clear the field.

3. Type the MAC address of the station you want to add in the

00-00-00-00-00-00 format and press Enter. To delete characters use
the Backspace key.

4. Use the arrow keys to highlight the Add/Del field.

5. Press Enter to toggle selections. Select the Add option.

6. Highlight the SAVE/EXECUTE command.

7. Press Enter. The station’s MAC address appears on the screen.

Deleting Stations from the Station Address Allowed List

To delete stations from the Station Address allowed list:

NOTE: You must set ring security to the Alarm/Remove mode to effectively
delete a station from the allowed list and keep it off the ring. If you delete
a station from the allowed list while in the Alarm Only mode, the station
can re-enter the ring and its MAC address will reappear in the allowed
list.

1. Highlight the Stn Edit field.

2. Press Enter to clear the field.

3. Type in the MAC address of the station you want to delete in the

00-00-00-00-00-00 format and press Enter. To delete characters, use
the Backspace key.

4. Highlight the Add/Del field.

5. Press Enter to toggle selections. Select the Del option.

6. Highlight the SAVE/EXECUTE command.

7. Press Enter. The station’s MAC address is deleted from the screen.

«
...
37
38
39
40
41
...
»

Summary of Contents for TRMM







































































Reviews:

No comments