manualshive.com logo in svg

Cabletron Systems TRMM, User Manual, Page: 21 / 70

Share
Download
Cabletron Systems TRMM User Manual Download Page 21

USING LOCAL MANAGEMENT

3-3

GATEWAY screen lets you input the IP address of the router used to 
reach the file server for the download.

DEVICE STATUS

This option accesses another menu screen – the DEVICE STATUS menu 
screen. There are two screens available from this menu that allow you to 
view the TRMM/TRMMIM’s status. These include:

•

CHASSIS STATUS VIEW - This selection lets you view the 
configuration, ring speed, and type of each token ring board currently 
inserted in the MMAC; monitor the operational or administrative 
status of all ports; individually enable or disable ring or station ports 
on a board, or collectively enable all ports on a board; set the boards 
in your MMAC chassis to management or auto mode; and enable or 
disable FNB MUX connections, which attach a board to, or detach it 
from, its neighbors; or activate the BYPASS MUX.

•

COMPONENT STATUS VIEW – This selection shows all the 
TRMM/TRMMIM’s current components.

DEVICE STATISTICS

The DEVICE STATISTICS Screen lets you view ring performance 
statistics and ring configuration information.

SNMP TOOL

With the SNMP TOOL selection, you can browse through MIBs by 
cycling, walking, or stepping through them. You can also perform GET 
operations on individual MIB OIDs as well as SET operations (assuming 
you have the correct Community Name access) and set parameters for 
initiating image downloads from remote servers. 

Summary of Contents for TRMM







































































Reviews:

No comments