INSTALLATION
3-4
3.3 ATTACHING STATIONS
Before connecting lobe cables, review the cabling recommendations
described in Section 2.3.
To connect a station to the TRMIM-62A:
1. Attach the Lobe Access Unit (LAU) BNC-to-DB9 male adaptor to the
female DB9 STP port on the station’s network interface card as shown
in Figure 3-2.
Figure 3-2 Attaching The LAU
Network Interface Port
LAU
RG 62 BNC
DB9
Port
Port
LAU Passive Balanced Splitter
150 ohm
93 ohm
Token Ring Station
