Chapter 6: Local Management
6-10
8H02-16 User’s Guide
6.6
GENERAL CONFIGURATION SCREEN
The General Configuration screen, Figure 6-5, allows the user to set the
system date and time, IP addresses and Subnet Masks, the Default
Interface and Default Gateway, the TFTP Gateway IP address, and the
COM port configuration.
Access the General Configuration screen from the Device Configuration
Menu screen by using the arrow keys to highlight the General
Configuration option and pressing ENTER. The General Configuration
screen, Figure 6-5, appears.
Figure 6-5
General Configuration Screen
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the physical address of the 8H02-16.
IP Address (Modifiable)
The display allows the IP address to be set for the 8H02-16.
Firmware Revision: XX.XX.XX
General Configuration
174215
Device Name: 8H02-16
BOOTPROM Revision: XX.XX.XX
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
Default Interface:
TFTP Gateway IP Addr:
Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:
Com 1: [ENABLED] Application: [LM]
8H02-16 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
00-00-ID-00-00-00
0.0.0.0
0.0.0.0
NONE DEFINED
NONE DEFINED
0.0.0.0
10/11/93
14:23:00
30 sec.
15 min.
Summary of Contents for SmartSwitch 8H02-16
