manualshive.com logo in svg

Cabletron Systems SmartSwitch 6E122, Supplement Manual

Share
Download
Cabletron Systems SmartSwitch 6E122 Supplement Manual Download Page 42

Chapter 1: Changes to Local Management Screens

1-24

Local Management Supplement

Reboot After Download (Modifiable when user chooses RUNTIME)

This field notifies the user that the SmartSwitch will reboot after the 
download is complete. If a RUNTIME Download is performed this field 
toggles between YES and NO. If YES is selected, the module reboots 
after the download is completed. If NO is selected the module will 
continue using the existing firmware image. The module stores the new 
firmware image in FLASH memory. When the module or 6C105 chassis 
is reset, the module will boot from FLASH memory using the new image.

TFTP Gateway IP Addr (Selectable)

This field shows the IP address of the TFTP gateway server defined in the 
General Configuration screen.

Last Image Server IP (Read-only)

This field shows the IP address of the server used for the previous FLASH 
Download.

Last Image File Name (Read-only)

This field shows the complete path and file name of the last image 
downloaded to FLASH.

Download Server IP (Selectable)

The IP address of the TFTP server to be used for the FLASH download is 
entered in this field.

Download File Name (Selectable)

The complete TFTP server path and file name of the new image is entered 
in this field.

1.9.1

Image File Download Using TFTP

Set the module to download to FLASH using TFTP as follows:

1.

Use the arrow keys to highlight the Download Method field.

2.

Use the SPACE bar to select TFTP.

NOTE

If TFTP or RUNTIME is selected as the download method 
(

Figure 1-10

), the following two additional fields display.

Summary of Contents for SmartSwitch 6E122




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands