Module Level Security Configuration
Local Management Supplement
3-7
3.3
MODULE LEVEL SECURITY CONFIGURATION
The Module Level Security Configuration screen,
Figure 3-3
, is used to
set the security state for all ports on a connector. All repeater ports on a
connector can be set to receive all frames (NonSecure state), lock on the
source address of the next frame received (LockOnNext) or a specific
address (LockedOnAddr). When either of the last two options are set, the
switch can be set to enable or disable the reception of frames and send or
not send traps when an intruder is detected.
To access the Module Level Security Configuration screen, use the arrow
keys to highlight the MODULE LEVEL SECURITY
CONFIGURATION menu item on the Repeater Configuration Menu
screen and press ENTER. The Module Level Security Configuration
screen displays.
Figure 3-3
Module Level Security Configuration Screen
27463_112w
Connector
Security State Action On Intruder
1
[NonSecure]
2
[LockedOnAddr]
[DisablePort] [SendTrap]
3
[LockOnNext]
[DisablePort] [SendTrap]
4
[NonSecure]
SAVE EXIT
RETURN
