Module Configuration Menu Screen
Local Management Supplement
1-19
Figure 1-8
Module Configuration Menu Screen
The following briefly explains each screen accessible from the Module
Configuration Menu screen:
GENERAL CONFIGURATION
Used to monitor and configure SmartSwitch operating parameters. For
details, refer to your SmartSwitch user’s guide.
SNMP COMMUNITY NAMES CONFIGURATION
Allows the user to enter new, change, or review the community names
used as access passwords for module management operation. Access is
limited based on the password level of the user. For details, refer to your
SmartSwitch user’s guide.
SNMP TRAPS CONFIGURATION
Provides display and configuration access to the table of IP addresses
used for trap destinations and associated community names. For details,
refer to your SmartSwitch user’s guide.
SYSTEM RESOURCES INFORMATION
Displays the CPU type used in the module and its operating speed;
displays the size of each memory system used (FLASH memory, DRAM
and NVRAM) in the module and the unused portion of each memory; and
displays the current CPU (switch) utilization and the peak switch
utilization. For details, refer to
Section 1.8
.
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES CONFIGURATION
SNMP TRAPS CONFIGURATION
SYSTEM RESOURCES INFORMATION
FLASH DOWNLOAD CONFIGURATION
PORT CONFIGURATION MENU
802.1 CONFIGURATION MENU
19602_66
RETURN
EXIT
