GPIM Network Connections
Installation
3-13
Figure 3-9
Fiber Optic GPIM Connections
3.
At the other end of the fiber optic cable, attach the SC connector to the other device. Verify that
a link exists by checking that the port Receive LED is ON (flashing amber, blinking green, or
solid green) for the GPIM. See
Figure 3-10
. Refer to
Chapter 4
for descriptions of the LEDs. If
the Receive LED is OFF and the Transmit LED is not blinking amber, perform the following
steps until it is ON:
a.
Check that the device at the other end of the link is Gigabit Ethernet compatible and has
power turned on.
b.
Verify proper crossover of fiber optic strands between the port on the GPIM and the fiber
optic device at the other end of the fiber optic link segment.
c.
Verify that the fiber optic connection meets the specifications outlined in
Appendix B
for
the installed GPIM.
SC Connector
GPIM-01 or GPIM-09
Key Latch
(bottom of SC Connector)
SC_GBIC
(bottom view)
keys
SC Connector
G
P
I
M
1
G
P
I
M
2
