Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual Download Page 57 | Manualshive

Page: 57 / 102

Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual Download Page 57

9033259

ELS100-S24TX2M User Interface 57

802.1Q VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q VLAN

features.

Figure 2-37. 802.1Q VLAN Port Configuration

SmartSTACK Local Management -- ELS100-S24TX2M

802.1Q VLAN Port Configuration :

U nit 1 Port 1 - 12

Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type

Filtering Status

Registrations PDU Origin

-------------------------------------------------------------------------------------------------------

1 1

All

FALSE DISABLED 0 00-00-00-00-00-00

2 1

All

FALSE DISABLED 0 00-00-00-00-00-00

3 1

All

FALSE DISABLED 0 00-00-00-00-00-00

4 1

All

FALSE DISABLED 0 00-00-00-00-00-00

5 1

All

FALSE DISABLED 0 00-00-00-00-00-00

6 1

All

FALSE DISABLED 0 00-00-00-00-00-00

7 1

All

FALSE DISABLED 0 00-00-00-00-00-00

8 1

All

FALSE DISABLED 0 00-00-00-00-00-00

9 1

All

FALSE DISABLED 0 00-00-00-00-00-00

10 1

All

FALSE DISABLED 0 00-00-00-00-00-00

11 1

All

FALSE DISABLED 0 00-00-00-00-00-00

12 1

All

FALSE DISABLED 0 00-00-00-00-00-00

<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>

Use <TAB> or arrow keys to move, other keys to make changes

Parameter

Description

PVID

The VLAN ID assigned to untagged frames received on this port.
Use the PVID to assign ports to the same untagged VLAN.

Acceptable Frame
Type*

This switch accepts “All” frame types, including VLAN tagged or
VLAN untagged frames. Note that all VLAN untagged frames
received on this port are assigned to the PVID for this port.

Ingress Filtering*

If set to “True,” incoming frames for VLANs which do not include
this port in their member set will be discarded at the inbound port.

GVRP Status

Enables or disables GVRP for this port. When disabled, any
GVRP packets received on this port will be discarded and no
GVRP registrations will be propagated from other ports.
Note that GVRP must be enabled for the switch before this setting
can take effect. (See Device Control Menu / Extended Bridge
Configuration.)

GVRP Failed
Registrations

The total number of failed GVRP registrations, for any reason, on
this port.

GVRP Last PDU
Origin

The Source MAC Address of the last GVRP message received on
this port.

* This control does not affect VLAN independent BPDU frames, such as GVRP or
STP. However, it does affect VLAN dependent BPDU frames, such as GMRP.

«
...
55
56
57
58
59
...
»

Summary of Contents for SmartSTACK ELS100-S24TX2M







































































































Reviews:

No comments