Cabletron Systems SmartSTACK ELS100-S24TX2M, Management Manual, Page: 33 / 102

9033259
ELS100-S24TX2M User Interface 33
Configuring the Switch
The Device Control menu is used to control a broad range of functions,
including port configuration, Spanning Tree support for redundant
switches, port mirroring, multicast filtering, and Virtual LANs. Each of the
setup screens provided by these configuration menus is described in the
following sections.
Figure 2-17. Device Control Menu
SmartSTACK Local Management -- ELS100-S24TX2M
Device Control Menu
Port Configuration ... Extended Bridge Configuration ...
Port Information ... 802.1P Configuration ...
Spanning Tree Configuration ... 802.1Q VLAN Base Information ...
Spanning Tree Information ...
802.1Q VLAN Current Table Information ...
Mirror Port Configuration ... 802.1Q VLAN Static Table Configuration ...
Port Trunking Configuration ... 802.1Q VLAN Port Configuration ...
IGMP Configuration ... Port GARP Configuration ...
Port GMRP Configuration ...
<OK>
Use <TAB> or arrow keys to move. < Enter> to select.
Selection Description
Port Configuration Sets communication parameters for ports.
Port Information Displays current port settings and port status.
Spanning Tree
Configuration Configures the switch, its ports and modules to participate in a
local Spanning Tree.
Spanning Tree
Information Displays the current Spanning Tree configuration for the switch,
its ports and modules.
Mirror Port
Configuration Sets the source and target ports for mirroring.
Port Trunking
Configuration Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
Extended Bridge
Configuration Displays/configures extended bridge capabilities provided by this
switch, including support for traffic classes, and VLAN extensions.
802.1P Configuration Configures default port priorities and queue assignments.
802.1Q VLAN
Base Information
Displays basic VLAN information, such as VLAN version number
and maximum VLANs supported.
802.1Q VLAN
Current Table
Information Displays VLAN groups and port members.
802.1Q VLAN Static
Table Configuration Configures VLAN groups via static assignments, including setting
port members, or restricting ports from being dynamically added
to a port by the GVRP protocol.