Cabletron Systems MMAC-M3FNB, Overview And Setup Manual

Page: 16 / 28

INSTALLATION REQUIREMENTS AND SPECIFICATIONS
Page 2-2
2.2 MMAC-M3FNB CONFIGURATION GUIDELINES
The MMAC-M3FNB has three slots: two that accept media interface
modules, or MIMs; and one for a management module. The slots are
numbered from bottom to top; slot #1 is a half-width slot reserved for
the management module. Cabletron Systems’ management modules,
such as the IRM3 and the EMME, are equipped with firmware-based
Local Management, which lets you manage the MMAC MIMs.
Management modules are also SNMP compliant, which means that an
MMAC equipped with a management module can be managed
remotely by any SNMP management software, including any one of
the SPECTRUM
®
for Open Systems suite of management products.
You can combine Token Ring, Ethernet, and FDDI MIMs in the same
MMAC; be sure to consult the appropriate management module and
MIM installation guides for detailed setup information.
2.3 OPERATING SPECIFICATIONS
The following lists the specifications for the MMAC-M3FNB.
Cabletron Systems reserves the right to change these specifications
without notice.
PHYSICAL
M3FNB
Dimensions: 6.3" high x 17" wide x 15" deep (16 cm high x
43.2 cm wide x 38.1 cm deep)
Weight: 10.6 lb (4.8 kg) without power supply
M3PSM
Dimensions: 4 1/2” high x 2 1/2” wide x 13 1/2” long (11.4 cm
high x 6.4 cm wide x 33.3 cm long)
Weight: 5 lb (2.3 kg)