Cabletron Systems MicroMMAC 22ES, User Manual

Page: 53 / 84

MicroMMAC Local Management User’s Guide Page 8-1
CHAPTER 8
BRIDGE SETUP SCREEN
This chapter explains how to use the Bridge Setup screen to select a
Spanning Tree protocol and enable/disable bridge ports. If the
MicroMMAC contains a Token Ring BRIM, the lower portion of the
Bridge Setup screen contains additional fields which relate to the
operation of Token Ring devices. Figure 8-1 shows the Bridge Setup
screen.
Figure 8-1 The Bridge Setup Screen
NOTE
Token Ring bridge information does not appear in this manual
but will be included with the next revision.
BRIDGE SETUP
SPANNING TREE PROTOCOL:
BRIDGE PORT ADMIN STATUS:
BRIDGE PORT PAIR ADMIN STATUS:
BRIDGE PORT TYPE
RING NUMBER (1-FFF):
HOP COUNT LIMIT (1-E):
SINGLE ROUTE BROADCAST:
FRAME TRANSLATION:
SAVE
[IEEE 802.1]
PORT XX --> ALL PORTS
PORT XX --> PORT [YY]
[SRT]
001
7
[AUTO-SPAN]
[DISABLED]
[BRIDGE_PORT XX] RETURN
[ENABLED]
[ENABLED]
This section appears only if device is Token Ring or if Token Ring BRIM is installed.
090835
Event Message Line
MicroMMAC Local Management Flash Image Version: XX.XX.XX