Cabletron Systems MicroMMAC 22ES, User Manual

Page: 36 / 84

Chapter 4: System Level Screen
Page 4-4 MicroMMAC Local Management User’s Guide
Baud Rate
This field only appears when the COM 1 or the COM 2 Application field
is set to SLIP. The default setting for this field is
NO_FRAMEWORK_ERROR. The MicroMMAC uses Auto-Baud
Detection which automatically detects the Baud rate for the
MicroMMAC.
4.2 SETTING THE SYSTEM DATE
To set the system date, perform the following steps:
1. Use the arrow keys to highlight the System Date field.
2. Enter the date in a MM/DD/YY format.
3. Press ENTER to set the system calendar.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered was a valid format, the Event Message field at the
top of the screen displays “SAVED OK.” If the entry was not valid,
Local Management does not alter the current value and refreshes the
System Date field with the previous value.
NOTE
When entering the date in the system date field, you do not
need to add separators between month, day, and year
numbers, as long as each entry uses two decimal numbers.
For example, to set the date to 03/17/96, type “031796” in the
System Date field.