USING THE SETUP OPTION
5-3
Factory Defaults:
Displays whether the IRM2 factory defaults are enabled or disabled.
5.1.2
Changing the Device Name
To change the Device Name:
1. Use the arrow keys to highlight the Device Name field.
2. Enter the desired text (up to 20 characters). If you enter too many
characters, the error message "Too Many Characters Entered" appears
on the screen.
3. Press Return.
4. Use the arrow keys to highlight the SAVE SETUP option at the
bottom of the Setup screen.
5. Press Return. The message "Modified Screen Information Has Been
Saved!" appears on the screen.
5.1.3
Using the Set IP Address Option
To set the Set IP Address:
1. Use the arrow keys to highlight the Set IP Address field.
2. Enter the address into the field using dotted decimal notation. The
format for this entry is XXX.XXX.XXX.XXX, with values of XXX
ranging from 1-254.
3. Press Return. If you enter an illegal IP Address in step 2 the error
message “Illegal Information Entered” appears on the screen.
4. Use the arrow keys to highlight the SAVE SETUP option at the
bottom of the Setup Screen.
5. Press Return. The message “Modified Screen Information Has Been
Saved!” appears on the screen.
