4-1
CHAPTER 4
USING THE COMMUNITY NAMES OPTION
The Community Names Option allows you to decide the type of access
(Read Only, Read/Write, or Superuser) SNMP workstations have to the
IRM2, and which workstations you want to receive alarms from the
device. You can also change the password or add new passwords to the
device by entering new Superuser names or altering existing Superuser
names.
4.1
COMMUNITY NAMES SCREEN
To access the Configure Community Names Screen:
1. Use the arrow keys to highlight the COMMUNITY NAMES option
at the bottom of the DEVICE/BOARD/PORT COUNTERS screen.
2. Press Return. The Community Names Screen, Figure 4-1, appears.
Figure 4-1
Community Names Screen
COMMUNITY NAMES
Please note: SU names are local passwords
-----------------------------------------------------------------------
Community Name Access Traps Trap IP Addr
-----------------------------------------------------------------------
public RO NO 0.0.0.0
ctron RW NO 0.0.0.0
SU NO 0.0.0.0
SAVE RETURN
