Cabletron Systems ESXMIM, Installation Manual

Page: 18 / 78

Chapter 2: Controls and Indicators
2-4 ESXMIM/ESXMIM-F2 Installation Guide
2.1.2 Internal Components
The components listed in the following entries are all hidden inside the
MMAC chassis when the ESXMIM has been installed. These components
may be located by removing the ESXMIM from the chassis and holding
the module in the orientation shown in Figure 2-3 and Figure 2-4.
Figure 2-3 ESXMIM Internal Components
Power and Management Backplane Connection
The ESXMIM connects to the power and management backplane bus of
the MMAC chassis through this multipin connector.
03
SDRAM SIMM Slot
LDRAM SIMM Slot
FLASH Memory SIMM Slot
Dip Switch Bank
Power and Management Backplane Connection
ICH1Book Page 4 Thursday, April 18, 1996 7:21 AM