Cabletron Systems ESXMIM, Installation Manual

Page: 10 / 78

Chapter 1: Introduction
1-2 ESXMIM/ESXMIM-F2 Installation Guide
Chapter 4, Troubleshooting , describes how to use LANVIEW LEDs on
the ESXMIM. The chapter defines the different LED conditions and
provides a table of simple troubleshooting instructions for module-related
difficulties.
Appendix A, Specifications , provides the physical specifications and
operating requirements of the ESXMIM. This appendix also contains
serial port pinout tables for constructing Local Management cables.
Appendix B, BRIM/EPIM Information , describes two series of modules
called BRIMs and EPIMs, which may be added to the ESXMIM to
provide additional capabilities or connectivity options.
Appendix C, Upgrading the ESXMIM , details the procedures that must
be followed when expanding the capabilities of the ESXMIM. This
appendix contains information on memory upgrades and the addition of
EPIM modules to the ESXMIM.
Appendix D, Ethernet Cabling Requirements , describes the test
characteristics that Ethernet cables must adhere to in order to be
standards-compliant. Any Ethernet link or cable that is to be connected to
the ESXMIM should be verified to be within the specifications and
limitations provided in this appendix.
1.2 ESXMIM OVERVIEW
The ESXMIM and ESXMIM-F2 are multi-interface Ethernet switching
modules designed to provide maximum throughput while supplying
comprehensive network management functionality. The ESXMIM and
ESXMIM-F2 must be configured in a Cabletron Systems Multi Media
Access Center (MMAC) hub.
ICH1Book Page 2 Thursday, April 18, 1996 7:21 AM