manualshive.com logo in svg

Cabletron Systems ESXMIM, Management Manual, Page: 29 / 86

Share
Download
Cabletron Systems ESXMIM Management Manual Download Page 29

The Main Menu Screen

ESXMIM/ESXMIM-F2 Local Management Guide

Page 3-5

3.3

THE MAIN MENU SCREEN

The Main Menu screen is the starting point from which all the Local 
Management screens are accessed. Figure 3-3 shows the Main Menu 
screen.

Figure 3-3

The Main Menu Screen

The Main Menu screen displays the following menu items:

•

Setup Menu – The Setup Menu provides access to Local Management 
screens that are used to configure the ESXMIM.

•

Status Menu – The Status Menu provides access to the Component 
Status screen which displays the operational and administrative status 
of ESXMIM MIB components. 

•

Statistics Menu – The Statistics Menu provides bridge statistics and 
performance information for the switch interfaces of the ESXMIM.

Flash Image Version: XX.XX.XX

MAIN MENU

04

SETUP MENU

STATUS MENU

STATISTICS MENU

MIB NAVIGATOR

ESXMIM Local Management

EXIT

Event Message Line

Summary of Contents for ESXMIM























































































Reviews:

No comments