Cabletron Systems DLE22-MA, User Manual

Page: 65 / 202

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
DLE2X-MA and DLE3X-MA Local Management. It also explains how to
use the Local Management screens and commands.
5.1 OVERVIEW
Local Management for the DLE2X-MA and DLE3X-MA consists of a
series of management screens that allow the management of the module,
the attached segments and the DLM6C-AA chassis. The management
screens allow the user to perform the following tasks:
• Manage any interface module in the chassis via a connection to a
single interface module.
• Assign IP addresses and subnet masks to the DLE2X-MA,
DLE3X-MA and the DLM6C-AA chassis.
• Control access to the DLE2X-MA, DLE3X-MA and the DLM6C-AA
chassis by establishing community names.
• Download a new image of operating software.
• Designate which Network Management Workstations receive SNMP
traps from the DLE2X-MA, DLE3X-MA and the DLM6C-AA
chassis.
• Monitor the environmental status of the DLM6C-AA chassis.
• View switch, interface, and RMON statistics.
• Assign ports to operate in standard or full duplex mode.
• Enable trunking of ports to perform load sharing.
The Local Management screens shown in this chapter are for
the DLE22-MA. The DLE32-MA, DLE33-MA and DLE23-MA
share most of the following Local Management screens. All
Local Management functions specific to any of the interface
modules are preceded by a Note to alert the reader.